Difunctional acrylate monomer and the most widely used reactive diluent in UV and EB curable inks, coatings and varnishes. TPGDA reduces viscosity, gives good flexibility and fast cure, and balances cost and performance in most UV formulations.
Trifunctional acrylate monomer for UV and EB curing. TMPTA gives high crosslink density, fast cure, hardness and scratch and chemical resistance, which makes it a standard choice for hard coatings, inks and varnishes.
Low-viscosity trifunctional acrylate monomer based on ethoxylated TMP. Compared with TMPTA it has lower skin irritation, lower shrinkage and better flexibility, while keeping fast UV cure. Widely used in inks, overprint varnishes and wood coatings.
Difunctional acrylate monomer with very low viscosity and strong diluting power. HDDA gives fast cure, good adhesion to plastics and metal and good chemical resistance in UV and EB curable inks, coatings and adhesives.
Low-viscosity difunctional acrylate monomer and a common reactive diluent in UV and EB curable inks, coatings and overprint varnishes. DPGDA offers good diluting power, flexibility and fast cure.
Monofunctional acrylate monomer with a bulky isobornyl structure. IBOA gives high Tg, hardness, low shrinkage and good adhesion to plastics, and is a strong diluent for urethane acrylate oligomers.
Monofunctional methacrylate monomer with high Tg, hardness, low shrinkage and good weathering. IBOMA is used in UV and thermal curing systems, acrylic resins, adhesives and 3D printing.
Highly efficient, non-yellowing Type I (alpha-hydroxy ketone) photoinitiator for UV curing of clear acrylate systems. The standard choice for clear coats and varnishes where colour stability matters.
Type II thioxanthone photoinitiator, used with an amine synergist. ITX absorbs at longer wavelengths, which makes it effective in pigmented UV inks and coatings and for through-cure of thicker films. Low-migration polymeric grades are available for food packaging.
Acrylated oligomers form the backbone of every UV and EB curable formulation and define hardness, flexibility, adhesion and weathering. We supply epoxy acrylates for hard, fast-curing coatings, urethane acrylates for flexibility and outdoor use, and polyester acrylates for wetting and adhesion.
A high-performance bio-derived anionic surfactant with better foaming characteristics in hard water and at elevated temperatures. AOS is biodegradable, low-irritation, and increasingly preferred as a sustainable alternative to SLES in green-positioned detergent and personal care formulations.
The world's single largest-volume anionic surfactant. LABSA is the principal feedstock for household laundry detergents, dishwashing liquids, and I&I cleaners after neutralisation to sodium LAS.
Aqueous formaldehyde solution (formalin) from 37% up to 54%, including tailor-made concentrations in between. European production with 15,000 tonnes per year available, supplied by road tanker FCA Rotterdam area (the Netherlands), for spot orders and regular contract supply.
Vanadium corrosion inhibitor for boilers and gas turbines burning crude or heavy fuel oil with high vanadium and sulfur. Prevents hot-end and cold-end corrosion.
Grades
Gas turbine grade (Mg 11-15%), Boiler grade (Mg 20-23.5%)
The world's most produced ketone solvent. Acetone's fast evaporation, full water miscibility, and broad compatibility make it indispensable in coatings, pharmaceutical synthesis, electronic-grade cleaning, and polymer dissolution.
A high-boiling cyclic ketone solvent with strong solvency for PVC and polyvinylidene chloride (PVDC). Cyclohexanone is the primary solvent in PVC pipe cement (CPVC/UPVC adhesives) and is an important intermediate in caprolactam production (Nylon 6 chain).
A highly polar aprotic solvent with the unique ability to penetrate biological membranes. Pharmaceutical-grade DMSO is used as a cryoprotectant in cell preservation, a reaction solvent for APIs, and a topical drug-carrier. Industrial DMSO is a solvent for synthetic fibres and specialty resins.
A fast-evaporating ester with excellent solvency for nitrocellulose, vinyl, and acrylic polymers. Also widely used in pharma film coating and nail care.
Grades
Technical Grade, Pure Grade, Food Grade (FEMA 2414)
A top-five globally traded solvent. IPA's rapid evaporation, low residue, and gentle toxicology profile underpin its dominance in personal care, disinfection, electronics degreasing, and pharmaceutical manufacturing.
A mid-polarity ketone combining strong dissolving power with relatively fast evaporation. MEK is the preferred solvent for nitrocellulose, vinyl, and epoxy systems in coatings, adhesives, and magnetic media manufacturing.
The dominant solvent in semiconductor photolithography and electronics-grade coatings. PGMEA's unique combination of high solvency, controlled evaporation, and ultra-low metal contamination makes it irreplaceable in photoresist formulations for PCB manufacturing and flat-panel display production.
A high-volume aromatic solvent and key chemical intermediate. In coatings and rubber adhesives, toluene delivers excellent dissolving power. As a petrochemical feedstock, it underpins TDI (toluene diisocyanate) production, the basis of flexible polyurethane foam globally.
A key intermediate and solvent with important roles in both downstream chemical production and coatings formulation. n-Butanol is the principal precursor to butyl acrylate and butyl acetate, and is used as a flow-and-levelling solvent in high-quality alkyd and acrylic finishes.
A non-polar aliphatic hydrocarbon solvent primarily used in the extraction of edible vegetable oils (soybean, sunflower, rapeseed). Technical hexane is used in adhesive formulation, rubber cement, and as a cleaning agent in textiles and leather.
Grades
Technical Grade 60-65%, Pure Grade >95%, Food Grade (Extraction)
High-molecular-weight phthalate delivering better performance at elevated temperatures vs. DINP. DIDP is the preferred choice for automotive under-bonnet applications and premium cable insulation where long-term high-temperature stability is required.
The dominant phthalate plasticizer globally. DINP is the plasticizer of choice for general-purpose flexible PVC, offering the best balance of performance (flexibility, electrical insulation, low volatility) and cost.
Non-phthalate adipate plasticizer known for very good low-temperature flexibility. DOA is the standard choice for food film wrapping below −40°C, refrigeration seals, and arctic/cold-climate cable insulation. Increasingly specified in REACH-restricted markets.
Premium phthalate meeting the most demanding performance requirements. DPHP delivers ultra-low volatility and excellent electrical properties, increasingly specified in sensitive applications where SVHC-free documentation is required.
A bio-based co-plasticizer and secondary heat stabiliser for PVC, derived from renewable soybean oil. ESBO scavenges HCl released during PVC processing, extending the thermal stability of the compound and acting synergistically with calcium-zinc stabiliser systems. EU food-contact approved.
A high-performance trimellitate plasticizer with the lowest volatility of any commercial PVC plasticizer. TOTM is specified for the most demanding applications: 105°C-rated power cables, aircraft wire, and high-temperature automotive wiring. Non-phthalate status provides additional regulatory comfort.
The engineering polymer of choice for applications demanding an appearance-key, tough, and easily processable material. ABS is the standard for automotive interior trim, consumer electronics housings, LEGO-type toys, and sanitary ware. Electroplating-grade ABS supports decorative chrome finishes in automotive and luxury goods.
Ethylene-vinyl acetate copolymers combining polyethylene's processability with polar properties from acetate content. Lower VA grades serve in hot-melt adhesives, foam compounds, and flexible packaging.
Grades
VA 9% (Hot Melt), VA 14% (Flexible), VA 18% (Foam), VA 28% (Solar Encapsulant)
The dominant polyethylene grade for structural applications. HDPE's high stiffness-to-density ratio makes it the material of choice for pressure pipe systems, industrial containers, and high-barrier packaging.
Flexible polyethylene grades dominating the global film market. LLDPE metallocene grades deliver better puncture resistance and downgauging capability in stretch and shrink films. LDPE extrusion coating is the foundation of liquid carton packaging (Tetra-style) and barrier laminates globally.
Grades
LDPE Film Grade, LDPE Extrusion Coating, LLDPE C6 Metallocene, LLDPE C8 Film
The most widely used engineering polyamide globally. Nylon 6's balance of mechanical strength, thermal stability, and chemical resistance makes it the material of choice for automotive mechanical parts, electrical connectors, and textile yarns (hosiery, carpet, industrial cord). GF30 grade dominates engine-bay applications.
Grades
Injection Moulding Grade, GF30 Reinforced, Film Grade, Fibre Grade
PET is the dominant polymer for carbonated and still beverage packaging globally, and the primary feedstock for polyester staple fibre and filament used in textiles. Intrinsic viscosity (IV) governs application suitability.
Grades
Bottle Grade IV 0.80, Fibre Grade IV 0.64, Film Grade IV 0.62, Tyre Cord Grade IV 0.95+
Suspension-grade PVC is the single most widely processed thermoplastic in construction, infrastructure, and packaging. K-value selection governs processing behaviour, from rigid K-57 for pressure pipe to K-80 paste for vinyl flooring and coatings.
The most versatile of all commodity thermoplastics. PP's combination of chemical resistance, temperature performance, and processability across injection moulding, film, fibre, and pipe extrusion makes it the world's second largest polymer by volume.
GPPS (crystal) delivers optical clarity and rigidity for packaging and consumer goods. HIPS (high-impact) incorporates rubber for toughness, used in appliance housings, yogurt cups, and decorative panels.
Grades
GPPS (Crystal) Injection, HIPS (Impact) Injection, GPPS for Thermoforming
A key polar vinyl monomer used in the production of ABS, acrylic fibres (Dralon, Orlon), nitrile rubber (NBR), and acrylamide. NBR from acrylonitrile underpins oil-resistant seals and gloves globally.
The world's most produced dicarboxylic acid. Adipic acid is the principal monomer in Nylon 6,6 production and a co-reactant in polyurethane polyol and DOA plasticizer synthesis. It is also used as a food acidulant and leavening agent where its mild flavour is preferred over citric acid.
The main precursor to polycarbonate and epoxy resins, two of the most important materials in modern industry. Polycarbonate BPA is used in optical lenses, electronic housings, and automotive glazing. Epoxy-grade BPA underpins all standard BPA-diglycidyl ether (BADGE) epoxy resins used in protective coatings and composites.
The sole monomer for Nylon 6 via ring-opening polymerisation. Caprolactam is produced from cyclohexanone (via Beckmann rearrangement) and is a globally key intermediate for the textile (nylon yarn, carpet), engineering plastics, and tyre cord industries.
A fundamental building block of the petrochemical chain. Styrene is the monomer for polystyrene, ABS, SBR rubber, and UPR (unsaturated polyester resins). As a key feedstock for the construction, automotive, and packaging sectors, styrene is one of the most actively traded monomers across EMEA and Asia.
The feedstock for PVOH, PVAc, PVDC, and VAE copolymer emulsions, all of which are widely used in adhesives, coatings, and construction. VAM is also the monomer for EVA copolymers used in solar encapsulants and hot-melt adhesives.
Biodegradable non-ionic surfactants offering a highly tunable HLB range. AEOs are the primary non-ionic actives in compact and concentrated laundry detergents, where they deliver excellent oil and sebum removal at lower temperatures than anionic systems. Also key emulsifiers in textile auxiliaries and agrochemical EC/EW formulations.
The leading amphoteric co-surfactant in personal care, derived from coconut oil. CAPB dramatically boosts foam stability, increases viscosity, and significantly reduces the irritation potential of anionic surfactant systems. It is the primary co-active in baby care, sensitive-skin, and premium hotel-grade toiletries.
Long-chain fatty alcohols derived from natural fats and oils (palm, coconut) or synthetic routes. They are multifunctional cosmetic actives (emollients, emulsion stabilisers, consistency agents) and precursors for SLES, AEOs, and ether carboxylates. Cetearyl alcohol is the standard consistency factor in hair conditioners and body creams globally.
The benchmark surfactant active for personal care and cosmetics globally. SLES 70% is used in shampoos, shower gels, bubble baths, and liquid soaps. The ethylene oxide content buffers skin irritation vs. SLS, making SLES the primary choice for consumer-facing formulations.
One of the most extensively characterised and widely used surfactants globally. SLS's strong foaming and detergency performance across a wide pH range makes it the primary surfactant in toothpaste, clarifying shampoos, and industrial cleaners. Also used as an emulsifier and wetting agent in emulsion polymerisation.
A versatile co-product from MEG production. DEG is used to make morpholine (a key corrosion inhibitor and pharmaceutical intermediate), polyurethane polyols, and saturated polyesters. Its hygroscopic nature makes it valuable in gas dehydration and textile processing where controlled moisture retention is needed.
A by-product of biodiesel and oleochemicals, and one of the most versatile polyols in commerce. Refined glycerine is a key humectant, sweetener, and excipient. Technical grade is the polyol feedstock for alkyd resins, nitroglycerine, and specialty esters.
One of the 20 highest-volume petrochemicals globally. MEG's principal use is as the diol monomer in PET polyester, feeding both the massive textile fibre industry and the global PET bottle market.
A low-toxicity, versatile diol with applications spanning pharmaceutical, food, cosmetic, and industrial sectors. Pharmaceutical-grade MPG is an excipient in injectable formulations, oral liquids, and topicals. Industrial grade is the preferred non-toxic alternative to MEG in food-zone and HVAC systems. Also a key building block for unsaturated polyester resins.
A neo-structure diol providing better hydrolytic and oxidative stability in polyester resins compared to simple glycols. NPG's two neopentyl methyl groups prevent ester bond hydrolysis, making it the key modifier for premium exterior powder coatings, alkyd resins for marine paints, and high-durability polyester films.
A family of water-soluble polymers with MW-dependent properties ranging from viscous liquids to waxy solids. PEGs are workhorses in pharmaceutical formulation (tablet binder, suppository base, coating), cosmetics (emollient, humectant), and industrial lubrication. Also key as the hydrophilic segment in PEG-based surfactants and drug conjugates.
A naturally occurring sugar alcohol and one of the most commercially important polyols for food, pharma, and personal care. Sorbitol is a key humectant and texturiser in toothpaste, the carrier in sugar-free confectionery syrups, and the starting material for pharmaceutical vitamin C (ascorbic acid) synthesis via the Reichstein process.
The standard glycol absorbent for natural gas dehydration in upstream oil & gas operations. TEG contactors absorb water vapour from wet gas streams to meet pipeline dew-point specifications.
The most commercially important organic acid. Glacial acetic acid is a fundamental feedstock in the production of vinyl acetate monomer (VAM), purified terephthalic acid (PTA), and all major acetate ester solvents. In diluted food-grade form, it serves as a preservative and acidulant.
The principal coagulant in municipal water treatment, used in hundreds of drinking water plants across Europe and the Middle East. Aluminium sulphate destabilises colloidal turbidity and suspended organics, enabling their aggregation and removal. Also used in paper sizing, textile mordanting, and as a soil amendment in horticulture.
The most key industrial alkali globally. Caustic soda underpins aluminium refining (Bayer process), Kraft pulp production, soap and detergent manufacture, PVC production (chloralkali), water treatment, and biodiesel refining.
The world's most widely used organic food acid, produced entirely by fermentation. Beyond its food role, citric acid is an effective chelating agent, biodegradable descaler, and pH buffer used extensively in personal care, industrial cleaning, and pharmaceutical formulations. Full GRAS and E330 status across all major regulatory frameworks.
A strong mineral acid with key roles across multiple industries. In metals, it is the primary acid for steel pickling and scale removal. In water treatment, it is used for pH adjustment and anion exchange resin regeneration.
A powerful, environmentally benign oxidising agent whose only by-products are oxygen and water. H₂O₂ is the standard bleaching chemical for pulp and textile whitening, a disinfectant in food-contact applications, and is increasingly used in advanced oxidation processes (AOP) for emerging contaminant removal in water treatment.
A medium-strength mineral acid with a wide range of applications from agriculture to food to surface treatment. Food-grade phosphoric acid is the acidulant in cola beverages. Technical grade underpins phosphate fertiliser production and metal phosphatisation, the most widely used pre-treatment for automotive painting.
Synthetic amorphous precipitated silica made for oral care. Abrasive grades clean and polish teeth with controlled RDA, while thickening grades build viscosity and structure in toothpaste and gels. Both types are compatible with fluoride and give the high transparency needed for clear gel toothpastes. Suitable for toothpaste producers, private label manufacturers and oral care formulators. We offer equivalent specifications to Tixosil® 43, Tixosil® 73, Tixosil® 63 and Tixosil® SoftClean™. Tixosil® is a trademark of its owner; Viora Chemicals is not affiliated with it.
One of the ten largest-volume industrial chemicals globally. Dense soda ash is the primary alkali in flat glass and container glass manufacturing, making it central to construction and packaging industries. Also used in detergent formulation as a builder/sequestrant, in water softening, and in chemical synthesis.
The most widely used white pigment, providing high opacity, brightness, and UV durability. Rutile TiO₂ is the main opacifier in architectural paints, a whitening masterbatch for plastics (PVC pipe, PP film, HDPE containers), and a photocatalyst in self-cleaning and air-purification applications. Among the highest-value traded pigments in EMEA.
Grades
Rutile Coatings Grade, Rutile Plastics Grade, Anatase Paper Grade
A multifunctional inorganic with roles as a rubber vulcanisation activator, UV-blocking pigment in sunscreens, nutrient supplement, and semiconductor material. In rubber compounding, ZnO (with stearic acid) activates the sulphur vulcanisation system in tyre and industrial rubber manufacturing. Critical industrial raw material across automotive and personal care sectors.
The global benchmark thermosetting resin for corrosion protection, structural bonding, and composites. Liquid BPA epoxy is the foundation of anti-corrosion pipeline coatings, tank linings, structural adhesives, carbon fibre wind turbine blades, and electrical laminates.
Thermoplastic tackifying resins produced from petroleum C5 or C9 fractions. These resins are key tackifiers in hot-melt adhesives (HMA) for packaging, diapers, and labels; reinforcing resins in tyre compounds; and compatibility agents in asphalt modification. Hydrogenated grades provide UV and oxidation stability for demanding outdoor and food-contact applications.
A water-soluble polymer combining film-forming, adhesive, and emulsifying properties. PVOH is the main protective colloid in suspension PVC polymerisation, a key binder in paper coating, and the precursor for PVB (polyvinyl butyral) safety glass interlayers. Water-soluble packaging film (detergent pods) is one of the fastest-growing PVOH applications in the European market.
Natural diterpene resins from pine trees, and their chemically modified derivatives. Rosin esters are key tackifiers and components in printing inks (newspaper offset, heatset web offset), chewing gum bases, adhesives, and as sizing agents in paper. Pentaerythritol ester of rosin (PEWR) is the premium tackifier for water-white solvent adhesives and food-contact HMA systems.
Aqueous styrene-acrylic dispersions are the primary binders in premium architectural coatings, delivering excellent scrub resistance, weathering stability, and gloss. In pressure-sensitive adhesive applications, styrene-acrylic systems provide the right balance of tack and peel adhesion for removable and permanent label and tape applications.
The dominant matrix resin for fibreglass-reinforced plastics (FRP/GRP) globally. UPR combined with glass fibre provides an excellent strength-to-weight ratio and corrosion resistance, making it key for boat hulls, chemical storage tanks, pipe systems, automotive body panels, and construction panels.
Waterborne copolymer emulsions combining vinyl acetate's adhesion and ethylene's water and thermal resistance. VAE emulsions are the dominant binder in interior and exterior latex paints, D3/D4 construction adhesives, non-woven binder applications, and paper coatings.
Grades
Interior Paint Grade, Exterior D4 Adhesive Grade, High Tg (>20°C)
Antimony Trioxide (ATO) is the global benchmark synergist for halogenated flame retardant systems. Combined with brominated or chlorinated flame retardants, ATO multiplies fire-retardant efficiency in plastics, textiles, electronics housings, cables, and rubber. It is also the principal polycondensation catalyst for PET resin and a refining agent in specialty glass production.
Room-temperature reactive crosslinker for carboxyl-functional waterborne acrylic and polyurethane dispersions. Aziridine crosslinkers provide excellent chemical resistance, block resistance, and film hardness in water-based packaging inks and industrial coatings without requiring elevated cure temperatures, a clear advantage for flexible packaging and cold-cure applications.
A mono-component isothiazolinone biocide offering excellent stability and compatibility with amine-containing formulations where CMIT/MIT is unsuitable. BIT is the preferred preservative for waterborne coatings, metalworking fluids, and personal care products in markets where CMIT is restricted. BPR PT2 and PT6 compliant.
The global standard in-can preservation system for waterborne paints, adhesives, and paper coatings. CMIT/MIT delivers broad-spectrum bactericidal and fungicidal efficacy at excellently low use concentrations. Formulated in full compliance with EU Biocidal Products Regulation (BPR), notified under PT2, PT6, and PT11. Documentation package includes SDS, efficacy data, and BPR notification reference.
CAS 52829-07-9 (monomeric HALS), Piperidine derivative
The most effective family of light stabilisers for outdoor-exposed polymers. HALS act as radical scavengers, interrupting the photooxidation chain reaction in PP, PE, PU, and coatings.
CAS 4035-89-6 / 28182-81-2, Aliphatic polyisocyanate
Aliphatic polyisocyanate crosslinkers giving the highest exterior durability in 2-component polyurethane coatings. Unlike TDI/MDI aromatic isocyanates, HDI derivatives provide absolute non-yellowing and UV resistance, making them the mandatory hardener in automotive OEM and refinish clearcoats, aerospace topcoats, and premium exterior architectural coatings.
Bifunctional organosilicon molecules that create covalent molecular bridges between inorganic surfaces (glass, silica, metals) and organic polymer matrices. Silanes are widely used in fibreglass composite sizing, silica-reinforced green tyres, adhesion-promoting primers, and surface treatment of mineral fillers. The right silane chemistry multiplies the performance of composite systems, adhesives, and coatings.
A metallic soap serving key functional roles as a release agent, lubricant, and heat stabiliser in polymer processing. In rubber, zinc stearate is the main activator co-agent with ZnO in sulphur vulcanisation systems. In PVC, it functions as an internal lubricant and component of calcium-zinc heat stabiliser packages, replacing toxic lead-based systems.