Product portfolio

Industrial chemicals for European manufacturers, fully documented

112 products across 13 categories. Data sheets for 31 products to download now; SDS and CoA supplied with every quotation.

Filter by Category
All Products 112 products
UV-Curing Materials

Tripropylene Glycol Diacrylate (TPGDA)

CAS 42978-66-5, C₁₅H₂₄O₆

Difunctional acrylate monomer and the most widely used reactive diluent in UV and EB curable inks, coatings and varnishes. TPGDA reduces viscosity, gives good flexibility and fast cure, and balances cost and performance in most UV formulations.

Grades
UV Grade (inhibited with MEHQ)
UV-Curing Materials

Trimethylolpropane Triacrylate (TMPTA)

CAS 15625-89-5, C₁₅H₂₀O₆

Trifunctional acrylate monomer for UV and EB curing. TMPTA gives high crosslink density, fast cure, hardness and scratch and chemical resistance, which makes it a standard choice for hard coatings, inks and varnishes.

Grades
UV Grade (inhibited with MEHQ)
UV-Curing Materials

Ethoxylated Trimethylolpropane Triacrylate (3EO / 4EO-TMPTA)

CAS 28961-43-5, (C₂H₄O)n C₁₅H₂₀O₆

Low-viscosity trifunctional acrylate monomer based on ethoxylated TMP. Compared with TMPTA it has lower skin irritation, lower shrinkage and better flexibility, while keeping fast UV cure. Widely used in inks, overprint varnishes and wood coatings.

Grades
3EO-TMPTA, 4EO-TMPTA (other EO levels on request)
UV-Curing Materials

1,6-Hexanediol Diacrylate (HDDA)

CAS 13048-33-4, C₁₂H₁₈O₄

Difunctional acrylate monomer with very low viscosity and strong diluting power. HDDA gives fast cure, good adhesion to plastics and metal and good chemical resistance in UV and EB curable inks, coatings and adhesives.

Grades
UV Grade (inhibited with MEHQ)
UV-Curing Materials

Dipropylene Glycol Diacrylate (DPGDA)

CAS 57472-68-1, C₁₂H₁₈O₅

Low-viscosity difunctional acrylate monomer and a common reactive diluent in UV and EB curable inks, coatings and overprint varnishes. DPGDA offers good diluting power, flexibility and fast cure.

Grades
UV Grade (inhibited with MEHQ)
UV-Curing Materials

Isobornyl Acrylate (IBOA)

CAS 5888-33-5, C₁₃H₂₀O₂

Monofunctional acrylate monomer with a bulky isobornyl structure. IBOA gives high Tg, hardness, low shrinkage and good adhesion to plastics, and is a strong diluent for urethane acrylate oligomers.

Grades
High Purity (inhibited with MEHQ)
UV-Curing Materials

Isobornyl Methacrylate (IBOMA)

CAS 7534-94-3, C₁₄H₂₂O₂

Monofunctional methacrylate monomer with high Tg, hardness, low shrinkage and good weathering. IBOMA is used in UV and thermal curing systems, acrylic resins, adhesives and 3D printing.

Grades
High Purity (inhibited with MEHQ)
UV-Curing Materials

Isopropylthioxanthone (ITX)

CAS 5495-84-1, C₁₆H₁₄OS

Type II thioxanthone photoinitiator, used with an amine synergist. ITX absorbs at longer wavelengths, which makes it effective in pigmented UV inks and coatings and for through-cure of thicker films. Low-migration polymeric grades are available for food packaging.

Grades
Mixture of 2- and 4-isomers, min. 99%
UV-Curing Materials

UV Oligomers (Epoxy, Urethane and Polyester Acrylates)

Acrylated oligomers

Acrylated oligomers form the backbone of every UV and EB curable formulation and define hardness, flexibility, adhesion and weathering. We supply epoxy acrylates for hard, fast-curing coatings, urethane acrylates for flexibility and outdoor use, and polyester acrylates for wetting and adhesion.

Grades
Epoxy Acrylates, Aliphatic and Aromatic Urethane Acrylates, Polyester Acrylates, Amine Synergists
Solvents
TDS

Methanol

CAS 67-56-1, CH₃OH

The world's most produced alcohol. Methanol is a basic chemical feedstock for formaldehyde, acetic acid, MTBE, and DME.

Grades
AA Grade (Chemical), Fuel Grade, Technical Grade
Surfactants & Detergents
TDS

AOS (Alpha Olefin Sulfonate C14-16)

CAS 68439-57-6, Variable

A high-performance bio-derived anionic surfactant with better foaming characteristics in hard water and at elevated temperatures. AOS is biodegradable, low-irritation, and increasingly preferred as a sustainable alternative to SLES in green-positioned detergent and personal care formulations.

Grades
AOS 35% Liquid, AOS 92% Powder
Formaldehyde & Amino Resins
TDS

Formaldehyde Solution 37-54%

CAS 50-00-0, CH₂O (aq.)

Aqueous formaldehyde solution (formalin) from 37% up to 54%, including tailor-made concentrations in between. European production with 15,000 tonnes per year available, supplied by road tanker FCA Rotterdam area (the Netherlands), for spot orders and regular contract supply.

Grades
37%, 44%, 50%, 54%, Tailor-made concentrations
Formaldehyde & Amino Resins
TDS

Paraformaldehyde

CAS 30525-89-4, (CH₂O)n

Solid polymer form of formaldehyde. Allows resin makers to reach high formaldehyde concentrations without adding water.

Grades
Prills 96 ± 1%, Powder 96 ± 1%
Lube Additives, Process Oils & Oilfield
TDS

Biphenyl

CAS 92-52-4, C₁₂H₁₀

High-purity biphenyl for heat transfer fluid manufacture and chemical synthesis.

Grades
Flakes >99.5%, Liquid >99.5%
Solvents

Acetone

CAS 67-64-1, (CH₃)₂CO

The world's most produced ketone solvent. Acetone's fast evaporation, full water miscibility, and broad compatibility make it indispensable in coatings, pharmaceutical synthesis, electronic-grade cleaning, and polymer dissolution.

Grades
Technical Grade, Pure Grade, ACS Reagent
Solvents

Cyclohexanone

CAS 108-94-1, C₆H₁₀O

A high-boiling cyclic ketone solvent with strong solvency for PVC and polyvinylidene chloride (PVDC). Cyclohexanone is the primary solvent in PVC pipe cement (CPVC/UPVC adhesives) and is an important intermediate in caprolactam production (Nylon 6 chain).

Grades
Technical Grade, Pure Grade
Solvents

DMSO (Dimethyl Sulfoxide)

CAS 67-68-5, C₂H₆OS

A highly polar aprotic solvent with the unique ability to penetrate biological membranes. Pharmaceutical-grade DMSO is used as a cryoprotectant in cell preservation, a reaction solvent for APIs, and a topical drug-carrier. Industrial DMSO is a solvent for synthetic fibres and specialty resins.

Grades
Pharmaceutical Grade (USP), Technical Grade, Electronic Grade
Solvents

Ethyl Acetate

CAS 141-78-6, CH₃COOC₂H₅

A fast-evaporating ester with excellent solvency for nitrocellulose, vinyl, and acrylic polymers. Also widely used in pharma film coating and nail care.

Grades
Technical Grade, Pure Grade, Food Grade (FEMA 2414)
Solvents

Isopropyl Alcohol (IPA)

CAS 67-63-0, C₃H₈O

A top-five globally traded solvent. IPA's rapid evaporation, low residue, and gentle toxicology profile underpin its dominance in personal care, disinfection, electronics degreasing, and pharmaceutical manufacturing.

Grades
Technical 99%, USP/BP 99.5%, Electronic Grade
Solvents

MEK (Methyl Ethyl Ketone)

CAS 78-93-3, C₄H₈O

A mid-polarity ketone combining strong dissolving power with relatively fast evaporation. MEK is the preferred solvent for nitrocellulose, vinyl, and epoxy systems in coatings, adhesives, and magnetic media manufacturing.

Grades
Technical Grade, Pure Grade
Solvents

PGMEA (Propylene Glycol Methyl Ether Acetate)

CAS 108-65-6, C₆H₁₂O₃

The dominant solvent in semiconductor photolithography and electronics-grade coatings. PGMEA's unique combination of high solvency, controlled evaporation, and ultra-low metal contamination makes it irreplaceable in photoresist formulations for PCB manufacturing and flat-panel display production.

Grades
Electronic Grade (>99.9%), Coatings Grade
Solvents

Toluene

CAS 108-88-3, C₇H₈

A high-volume aromatic solvent and key chemical intermediate. In coatings and rubber adhesives, toluene delivers excellent dissolving power. As a petrochemical feedstock, it underpins TDI (toluene diisocyanate) production, the basis of flexible polyurethane foam globally.

Grades
Technical Grade, Pure Grade, Nitration Grade
Solvents

Xylene (Mixed Isomers)

CAS 1330-20-7, C₈H₁₀

Mixed xylenes are high-boiling aromatic solvents supplying the coatings and resins market with a versatile, slow-evaporating diluent.

Grades
Technical Grade, Pure Grade
Solvents

n-Butanol

CAS 71-36-3, C₄H₁₀O

A key intermediate and solvent with important roles in both downstream chemical production and coatings formulation. n-Butanol is the principal precursor to butyl acrylate and butyl acetate, and is used as a flow-and-levelling solvent in high-quality alkyd and acrylic finishes.

Grades
Technical Grade, Pure Grade
Solvents

n-Hexane

CAS 110-54-3, C₆H₁₄

A non-polar aliphatic hydrocarbon solvent primarily used in the extraction of edible vegetable oils (soybean, sunflower, rapeseed). Technical hexane is used in adhesive formulation, rubber cement, and as a cleaning agent in textiles and leather.

Grades
Technical Grade 60-65%, Pure Grade >95%, Food Grade (Extraction)
Plasticizers

DIDP (Diisodecyl Phthalate)

CAS 26761-40-0, C₂₈H₄₆O₄

High-molecular-weight phthalate delivering better performance at elevated temperatures vs. DINP. DIDP is the preferred choice for automotive under-bonnet applications and premium cable insulation where long-term high-temperature stability is required.

Grades
Standard Grade
Plasticizers

DINP (Diisononyl Phthalate)

CAS 68515-48-0, C₂₆H₄₂O₄

The dominant phthalate plasticizer globally. DINP is the plasticizer of choice for general-purpose flexible PVC, offering the best balance of performance (flexibility, electrical insulation, low volatility) and cost.

Grades
Standard Grade, Low-VOC Grade
Plasticizers

DOA (Dioctyl Adipate)

CAS 103-23-1, C₂₂H₄₂O₄

Non-phthalate adipate plasticizer known for very good low-temperature flexibility. DOA is the standard choice for food film wrapping below −40°C, refrigeration seals, and arctic/cold-climate cable insulation. Increasingly specified in REACH-restricted markets.

Grades
Technical Grade, Food-Contact Grade
Plasticizers

DPHP (Di(2-propylheptyl) Phthalate)

CAS 53306-54-0, C₂₈H₄₆O₄

Premium phthalate meeting the most demanding performance requirements. DPHP delivers ultra-low volatility and excellent electrical properties, increasingly specified in sensitive applications where SVHC-free documentation is required.

Grades
Standard Grade
Plasticizers

ESBO (Epoxidised Soybean Oil)

CAS 8013-07-8, Triglyceride (epoxidised)

A bio-based co-plasticizer and secondary heat stabiliser for PVC, derived from renewable soybean oil. ESBO scavenges HCl released during PVC processing, extending the thermal stability of the compound and acting synergistically with calcium-zinc stabiliser systems. EU food-contact approved.

Grades
Standard Food-Contact Grade, Technical Grade
Plasticizers

TOTM (Tris(2-ethylhexyl) Trimellitate)

CAS 3319-31-1, C₃₃H₅₄O₆

A high-performance trimellitate plasticizer with the lowest volatility of any commercial PVC plasticizer. TOTM is specified for the most demanding applications: 105°C-rated power cables, aircraft wire, and high-temperature automotive wiring. Non-phthalate status provides additional regulatory comfort.

Grades
Technical Grade
Polymer Resins & Compounds

ABS (Acrylonitrile Butadiene Styrene)

CAS 9003-56-9, Terpolymer

The engineering polymer of choice for applications demanding an appearance-key, tough, and easily processable material. ABS is the standard for automotive interior trim, consumer electronics housings, LEGO-type toys, and sanitary ware. Electroplating-grade ABS supports decorative chrome finishes in automotive and luxury goods.

Grades
Natural (Unpigmented), Flame Retardant V0, Plating Grade, High-Gloss Grade
Polymer Resins & Compounds

EVA Copolymer

CAS 24937-78-8, Copolymer

Ethylene-vinyl acetate copolymers combining polyethylene's processability with polar properties from acetate content. Lower VA grades serve in hot-melt adhesives, foam compounds, and flexible packaging.

Grades
VA 9% (Hot Melt), VA 14% (Flexible), VA 18% (Foam), VA 28% (Solar Encapsulant)
Polymer Resins & Compounds

HDPE (High-Density Polyethylene)

CAS 9002-88-4, [CH₂CH₂]ₙ

The dominant polyethylene grade for structural applications. HDPE's high stiffness-to-density ratio makes it the material of choice for pressure pipe systems, industrial containers, and high-barrier packaging.

Grades
Pipe Grade PN10/PN16, Blow Moulding Grade, Film Grade, Injection Moulding Grade
Polymer Resins & Compounds

LDPE / LLDPE

CAS 9002-88-4, [CH₂CH₂]ₙ

Flexible polyethylene grades dominating the global film market. LLDPE metallocene grades deliver better puncture resistance and downgauging capability in stretch and shrink films. LDPE extrusion coating is the foundation of liquid carton packaging (Tetra-style) and barrier laminates globally.

Grades
LDPE Film Grade, LDPE Extrusion Coating, LLDPE C6 Metallocene, LLDPE C8 Film
Polymer Resins & Compounds

Nylon 6 (Polyamide 6)

CAS 25038-54-4, [NH(CH₂)₅CO]ₙ

The most widely used engineering polyamide globally. Nylon 6's balance of mechanical strength, thermal stability, and chemical resistance makes it the material of choice for automotive mechanical parts, electrical connectors, and textile yarns (hosiery, carpet, industrial cord). GF30 grade dominates engine-bay applications.

Grades
Injection Moulding Grade, GF30 Reinforced, Film Grade, Fibre Grade
Polymer Resins & Compounds

PET Resin (Bottle & Fibre Grade)

CAS 25038-59-9, Polyester

PET is the dominant polymer for carbonated and still beverage packaging globally, and the primary feedstock for polyester staple fibre and filament used in textiles. Intrinsic viscosity (IV) governs application suitability.

Grades
Bottle Grade IV 0.80, Fibre Grade IV 0.64, Film Grade IV 0.62, Tyre Cord Grade IV 0.95+
Polymer Resins & Compounds

PVC Resin (S-PVC)

CAS 9002-86-2, [CH₂CHCl]ₙ

Suspension-grade PVC is the single most widely processed thermoplastic in construction, infrastructure, and packaging. K-value selection governs processing behaviour, from rigid K-57 for pressure pipe to K-80 paste for vinyl flooring and coatings.

Grades
K-57 (Rigid), K-65 (General), K-67 (Flexible), K-70 (Plastisol), K-80 (Paste)
Polymer Resins & Compounds

Polypropylene (PP)

CAS 9003-07-0, [CH₂CH(CH₃)]ₙ

The most versatile of all commodity thermoplastics. PP's combination of chemical resistance, temperature performance, and processability across injection moulding, film, fibre, and pipe extrusion makes it the world's second largest polymer by volume.

Grades
Homopolymer (Injection), Random Copolymer (Film/Pipe), Impact Copolymer (Automotive), Raffia Grade, Fibre Grade
Polymer Resins & Compounds

Polystyrene (GPPS & HIPS)

CAS 9003-53-6, [CH₂CH(C₆H₅)]ₙ

GPPS (crystal) delivers optical clarity and rigidity for packaging and consumer goods. HIPS (high-impact) incorporates rubber for toughness, used in appliance housings, yogurt cups, and decorative panels.

Grades
GPPS (Crystal) Injection, HIPS (Impact) Injection, GPPS for Thermoforming
Monomers & Intermediates

Acrylonitrile

CAS 107-13-1, C₃H₃N

A key polar vinyl monomer used in the production of ABS, acrylic fibres (Dralon, Orlon), nitrile rubber (NBR), and acrylamide. NBR from acrylonitrile underpins oil-resistant seals and gloves globally.

Grades
Polymerisation Grade (>99.5%)
Monomers & Intermediates

Adipic Acid

CAS 124-04-9, C₆H₁₀O₄

The world's most produced dicarboxylic acid. Adipic acid is the principal monomer in Nylon 6,6 production and a co-reactant in polyurethane polyol and DOA plasticizer synthesis. It is also used as a food acidulant and leavening agent where its mild flavour is preferred over citric acid.

Grades
Polymer Grade (>99.7%), Technical Grade
Monomers & Intermediates

Bisphenol A (BPA)

CAS 80-05-7, C₁₅H₁₆O₂

The main precursor to polycarbonate and epoxy resins, two of the most important materials in modern industry. Polycarbonate BPA is used in optical lenses, electronic housings, and automotive glazing. Epoxy-grade BPA underpins all standard BPA-diglycidyl ether (BADGE) epoxy resins used in protective coatings and composites.

Grades
Polycarbonate Grade, Epoxy Grade
Monomers & Intermediates

Caprolactam

CAS 105-60-2, C₆H₁₁NO

The sole monomer for Nylon 6 via ring-opening polymerisation. Caprolactam is produced from cyclohexanone (via Beckmann rearrangement) and is a globally key intermediate for the textile (nylon yarn, carpet), engineering plastics, and tyre cord industries.

Grades
Polymer Grade Molten, Flake Grade
Monomers & Intermediates

Maleic Anhydride

CAS 108-31-6, C₄H₂O₃

A bifunctional anhydride monomer with a reactive structure enabling both Diels-Alder chemistry and condensation polymerisation.

Grades
Technical Briquettes 99.5%, Molten Grade
Monomers & Intermediates

Styrene Monomer

CAS 100-42-5, C₈H₈

A fundamental building block of the petrochemical chain. Styrene is the monomer for polystyrene, ABS, SBR rubber, and UPR (unsaturated polyester resins). As a key feedstock for the construction, automotive, and packaging sectors, styrene is one of the most actively traded monomers across EMEA and Asia.

Grades
Polymerisation Grade (>99.8%), Technical Grade
Monomers & Intermediates

Vinyl Acetate Monomer (VAM)

CAS 108-05-4, CH₃COOCHCH₂

The feedstock for PVOH, PVAc, PVDC, and VAE copolymer emulsions, all of which are widely used in adhesives, coatings, and construction. VAM is also the monomer for EVA copolymers used in solar encapsulants and hot-melt adhesives.

Grades
Polymerisation Grade (>99.5%)
Surfactants & Detergents

Alcohol Ethoxylates (AEO)

CAS 68439-46-3, CₙH₂ₙ₊₁(OCH₂CH₂)ₓOH

Biodegradable non-ionic surfactants offering a highly tunable HLB range. AEOs are the primary non-ionic actives in compact and concentrated laundry detergents, where they deliver excellent oil and sebum removal at lower temperatures than anionic systems. Also key emulsifiers in textile auxiliaries and agrochemical EC/EW formulations.

Grades
AEO-3 (Emulsifier), AEO-7 (Wetter), AEO-9 (Detergent), AEO-12 (Mild Cleanser)
Surfactants & Detergents

Cocamidopropyl Betaine (CAPB)

CAS 61789-40-0, Variable

The leading amphoteric co-surfactant in personal care, derived from coconut oil. CAPB dramatically boosts foam stability, increases viscosity, and significantly reduces the irritation potential of anionic surfactant systems. It is the primary co-active in baby care, sensitive-skin, and premium hotel-grade toiletries.

Grades
CAPB 30% Active, CAPB 35% Active
Surfactants & Detergents

Fatty Alcohols (C12-C18)

CAS 67762-41-8 (mixed), CₙH₂ₙ₊₁OH

Long-chain fatty alcohols derived from natural fats and oils (palm, coconut) or synthetic routes. They are multifunctional cosmetic actives (emollients, emulsion stabilisers, consistency agents) and precursors for SLES, AEOs, and ether carboxylates. Cetearyl alcohol is the standard consistency factor in hair conditioners and body creams globally.

Grades
Lauryl C12, Myristyl C14, Cetyl C16, Stearyl C18, Cetearyl C16/C18
Surfactants & Detergents

SLES (Sodium Lauryl Ether Sulfate)

CAS 68585-34-2, C₁₂H₂₅(OCH₂CH₂)ₙOSO₃Na

The benchmark surfactant active for personal care and cosmetics globally. SLES 70% is used in shampoos, shower gels, bubble baths, and liquid soaps. The ethylene oxide content buffers skin irritation vs. SLS, making SLES the primary choice for consumer-facing formulations.

Grades
SLES 2EO 70%, SLES 3EO 70%
Surfactants & Detergents

Sodium Lauryl Sulfate (SLS)

CAS 151-21-3, C₁₂H₂₅SO₄Na

One of the most extensively characterised and widely used surfactants globally. SLS's strong foaming and detergency performance across a wide pH range makes it the primary surfactant in toothpaste, clarifying shampoos, and industrial cleaners. Also used as an emulsifier and wetting agent in emulsion polymerisation.

Grades
28% Paste, 90% Needles, 93% Powder
Glycols & Polyols

DEG (Diethylene Glycol)

CAS 111-46-6, (HOCH₂CH₂)₂O

A versatile co-product from MEG production. DEG is used to make morpholine (a key corrosion inhibitor and pharmaceutical intermediate), polyurethane polyols, and saturated polyesters. Its hygroscopic nature makes it valuable in gas dehydration and textile processing where controlled moisture retention is needed.

Grades
Industrial Grade, Technical Grade
Glycols & Polyols

Glycerine (Glycerol) 99.5%

CAS 56-81-5, HOCH₂CH(OH)CH₂OH

A by-product of biodiesel and oleochemicals, and one of the most versatile polyols in commerce. Refined glycerine is a key humectant, sweetener, and excipient. Technical grade is the polyol feedstock for alkyd resins, nitroglycerine, and specialty esters.

Grades
Refined 99.5% USP/BP, Technical Grade, Crude 80%
Glycols & Polyols

MEG (Monoethylene Glycol)

CAS 107-21-1, HOCH₂CH₂OH

One of the 20 highest-volume petrochemicals globally. MEG's principal use is as the diol monomer in PET polyester, feeding both the massive textile fibre industry and the global PET bottle market.

Grades
Fiber Grade, Antifreeze/Coolant Grade, Industrial Grade
Glycols & Polyols

MPG (Monopropylene Glycol)

CAS 57-55-6, CH₃CH(OH)CH₂OH

A low-toxicity, versatile diol with applications spanning pharmaceutical, food, cosmetic, and industrial sectors. Pharmaceutical-grade MPG is an excipient in injectable formulations, oral liquids, and topicals. Industrial grade is the preferred non-toxic alternative to MEG in food-zone and HVAC systems. Also a key building block for unsaturated polyester resins.

Grades
USP/BP Pharmaceutical Grade, Food Grade (E1520), Technical/Industrial Grade
Glycols & Polyols

Neopentyl Glycol (NPG)

CAS 126-30-7, C₅H₁₂O₂

A neo-structure diol providing better hydrolytic and oxidative stability in polyester resins compared to simple glycols. NPG's two neopentyl methyl groups prevent ester bond hydrolysis, making it the key modifier for premium exterior powder coatings, alkyd resins for marine paints, and high-durability polyester films.

Grades
Technical Grade >99%
Glycols & Polyols

Polyethylene Glycol (PEG)

CAS 25322-68-3, H(OCH₂CH₂)ₙOH

A family of water-soluble polymers with MW-dependent properties ranging from viscous liquids to waxy solids. PEGs are workhorses in pharmaceutical formulation (tablet binder, suppository base, coating), cosmetics (emollient, humectant), and industrial lubrication. Also key as the hydrophilic segment in PEG-based surfactants and drug conjugates.

Grades
PEG 400, PEG 600, PEG 1000, PEG 4000, PEG 6000, PEG 20000
Glycols & Polyols

Sorbitol 70% Solution

CAS 50-70-4, C₆H₁₄O₆

A naturally occurring sugar alcohol and one of the most commercially important polyols for food, pharma, and personal care. Sorbitol is a key humectant and texturiser in toothpaste, the carrier in sugar-free confectionery syrups, and the starting material for pharmaceutical vitamin C (ascorbic acid) synthesis via the Reichstein process.

Grades
Food Grade 70%, Non-Crystallising 70%, Crystalline Powder
Glycols & Polyols

TEG (Triethylene Glycol)

CAS 112-27-6, C₆H₁₄O₄

The standard glycol absorbent for natural gas dehydration in upstream oil & gas operations. TEG contactors absorb water vapour from wet gas streams to meet pipeline dew-point specifications.

Grades
Industrial Grade (>99%), Technical Grade
Acids, Alkalis & Inorganics

Acetic Acid (Glacial)

CAS 64-19-7, CH₃COOH

The most commercially important organic acid. Glacial acetic acid is a fundamental feedstock in the production of vinyl acetate monomer (VAM), purified terephthalic acid (PTA), and all major acetate ester solvents. In diluted food-grade form, it serves as a preservative and acidulant.

Grades
Glacial 99.85% min, Technical Grade, Food Grade (E260)
Acids, Alkalis & Inorganics

Aluminium Sulphate

CAS 10043-01-3, Al₂(SO₄)₃

The principal coagulant in municipal water treatment, used in hundreds of drinking water plants across Europe and the Middle East. Aluminium sulphate destabilises colloidal turbidity and suspended organics, enabling their aggregation and removal. Also used in paper sizing, textile mordanting, and as a soil amendment in horticulture.

Grades
Liquid 8% Al₂O₃, Granular 17% (Anhydrous)
Acids, Alkalis & Inorganics

Caustic Soda (NaOH)

CAS 1310-73-2, NaOH

The most key industrial alkali globally. Caustic soda underpins aluminium refining (Bayer process), Kraft pulp production, soap and detergent manufacture, PVC production (chloralkali), water treatment, and biodiesel refining.

Grades
Flakes 98-99%, Prills 98%, Liquid 50%, Liquid 32%
Acids, Alkalis & Inorganics

Citric Acid

CAS 77-92-9, C₆H₈O₇

The world's most widely used organic food acid, produced entirely by fermentation. Beyond its food role, citric acid is an effective chelating agent, biodegradable descaler, and pH buffer used extensively in personal care, industrial cleaning, and pharmaceutical formulations. Full GRAS and E330 status across all major regulatory frameworks.

Grades
Anhydrous Food Grade (E330), Monohydrate Food Grade, Technical Grade
Acids, Alkalis & Inorganics

Hydrochloric Acid (HCl)

CAS 7647-01-0, HCl (aq)

A strong mineral acid with key roles across multiple industries. In metals, it is the primary acid for steel pickling and scale removal. In water treatment, it is used for pH adjustment and anion exchange resin regeneration.

Grades
Technical 30-33%, Reagent 37%, Electronic Grade
Acids, Alkalis & Inorganics

Hydrogen Peroxide (H₂O₂)

CAS 7722-84-1, H₂O₂

A powerful, environmentally benign oxidising agent whose only by-products are oxygen and water. H₂O₂ is the standard bleaching chemical for pulp and textile whitening, a disinfectant in food-contact applications, and is increasingly used in advanced oxidation processes (AOP) for emerging contaminant removal in water treatment.

Grades
35% Technical, 50% Industrial, 35% Food Grade, 60% Electronics
Acids, Alkalis & Inorganics

Phosphoric Acid (H₃PO₄)

CAS 7664-38-2, H₃PO₄

A medium-strength mineral acid with a wide range of applications from agriculture to food to surface treatment. Food-grade phosphoric acid is the acidulant in cola beverages. Technical grade underpins phosphate fertiliser production and metal phosphatisation, the most widely used pre-treatment for automotive painting.

Grades
Food Grade 85% (E338), Technical Grade 85%, Industrial 75%
Acids, Alkalis & Inorganics

Precipitated Silica (Dental Grade)

CAS 7631-86-9, SiO₂, nH₂O

Synthetic amorphous precipitated silica made for oral care. Abrasive grades clean and polish teeth with controlled RDA, while thickening grades build viscosity and structure in toothpaste and gels. Both types are compatible with fluoride and give the high transparency needed for clear gel toothpastes. Suitable for toothpaste producers, private label manufacturers and oral care formulators. We offer equivalent specifications to Tixosil® 43, Tixosil® 73, Tixosil® 63 and Tixosil® SoftClean™. Tixosil® is a trademark of its owner; Viora Chemicals is not affiliated with it.

Grades
Thickening Grade, Tixosil® 43 equivalent (approx. 10 µm), Abrasive Grade, Tixosil® 73 equivalent (RDA approx. 100), High Abrasive Grade, Tixosil® 63 equivalent (RDA approx. 120), Low Abrasive Grade, Tixosil® SoftClean™ equivalent (RDA approx. 60)
Acids, Alkalis & Inorganics

Soda Ash (Sodium Carbonate)

CAS 497-19-8, Na₂CO₃

One of the ten largest-volume industrial chemicals globally. Dense soda ash is the primary alkali in flat glass and container glass manufacturing, making it central to construction and packaging industries. Also used in detergent formulation as a builder/sequestrant, in water softening, and in chemical synthesis.

Grades
Dense Grade (>99.2%), Light Grade
Acids, Alkalis & Inorganics

Titanium Dioxide (TiO₂)

CAS 13463-67-7, TiO₂

The most widely used white pigment, providing high opacity, brightness, and UV durability. Rutile TiO₂ is the main opacifier in architectural paints, a whitening masterbatch for plastics (PVC pipe, PP film, HDPE containers), and a photocatalyst in self-cleaning and air-purification applications. Among the highest-value traded pigments in EMEA.

Grades
Rutile Coatings Grade, Rutile Plastics Grade, Anatase Paper Grade
Acids, Alkalis & Inorganics

Zinc Oxide (ZnO)

CAS 1314-13-2, ZnO

A multifunctional inorganic with roles as a rubber vulcanisation activator, UV-blocking pigment in sunscreens, nutrient supplement, and semiconductor material. In rubber compounding, ZnO (with stearic acid) activates the sulphur vulcanisation system in tyre and industrial rubber manufacturing. Critical industrial raw material across automotive and personal care sectors.

Grades
Rubber Grade (French Process), Pharmaceutical Grade (USP), Nano Grade
Resins & Binders

Epoxy Resin (BPA-based Liquid)

CAS 25068-38-6, BADGE-based

The global benchmark thermosetting resin for corrosion protection, structural bonding, and composites. Liquid BPA epoxy is the foundation of anti-corrosion pipeline coatings, tank linings, structural adhesives, carbon fibre wind turbine blades, and electrical laminates.

Grades
Standard EEW 182-192 (LV), Low-Viscosity EEW 170-180, Solid EEW 450-525, Solid EEW 875-1000
Resins & Binders

Hydrocarbon Resin (C5 / C9 / C5C9)

Various, Aliphatic / Aromatic Polymer

Thermoplastic tackifying resins produced from petroleum C5 or C9 fractions. These resins are key tackifiers in hot-melt adhesives (HMA) for packaging, diapers, and labels; reinforcing resins in tyre compounds; and compatibility agents in asphalt modification. Hydrogenated grades provide UV and oxidation stability for demanding outdoor and food-contact applications.

Grades
Aliphatic C5 (Light Colour), Aromatic C9 (Amber), Hydrogenated DCPD (UV Stable)
Resins & Binders

Polyvinyl Alcohol (PVOH)

CAS 9002-89-5, [CH₂CH(OH)]ₙ

A water-soluble polymer combining film-forming, adhesive, and emulsifying properties. PVOH is the main protective colloid in suspension PVC polymerisation, a key binder in paper coating, and the precursor for PVB (polyvinyl butyral) safety glass interlayers. Water-soluble packaging film (detergent pods) is one of the fastest-growing PVOH applications in the European market.

Grades
Fully Hydrolysed 98-99%, Partially Hydrolysed 87-89%, Low-Viscosity (4% sol. 4-6 mPas)
Resins & Binders

Rosin & Derivatives

CAS 8050-09-7 (Gum Rosin), Diterpene resin acids

Natural diterpene resins from pine trees, and their chemically modified derivatives. Rosin esters are key tackifiers and components in printing inks (newspaper offset, heatset web offset), chewing gum bases, adhesives, and as sizing agents in paper. Pentaerythritol ester of rosin (PEWR) is the premium tackifier for water-white solvent adhesives and food-contact HMA systems.

Grades
Gum Rosin WW/WG, Tall Oil Rosin, Ester Gum (Glycerol Ester), Pentaerythritol Ester (PEWR)
Resins & Binders

Styrene-Acrylic Emulsion

CAS 25085-34-1, Copolymer emulsion

Aqueous styrene-acrylic dispersions are the primary binders in premium architectural coatings, delivering excellent scrub resistance, weathering stability, and gloss. In pressure-sensitive adhesive applications, styrene-acrylic systems provide the right balance of tack and peel adhesion for removable and permanent label and tape applications.

Grades
Interior Paint Grade, Exterior Premium Grade, PSA Adhesive Grade
Resins & Binders

Unsaturated Polyester Resin (UPR)

CAS 68553-81-1, Polyester

The dominant matrix resin for fibreglass-reinforced plastics (FRP/GRP) globally. UPR combined with glass fibre provides an excellent strength-to-weight ratio and corrosion resistance, making it key for boat hulls, chemical storage tanks, pipe systems, automotive body panels, and construction panels.

Grades
Orthophthalic Standard, Isophthalic Marine Grade, DCPD Economy Grade, Fire-Retardant Grade
Resins & Binders

VAE Emulsion (Vinyl Acetate-Ethylene)

CAS 24937-78-8, Copolymer emulsion

Waterborne copolymer emulsions combining vinyl acetate's adhesion and ethylene's water and thermal resistance. VAE emulsions are the dominant binder in interior and exterior latex paints, D3/D4 construction adhesives, non-woven binder applications, and paper coatings.

Grades
Interior Paint Grade, Exterior D4 Adhesive Grade, High Tg (>20°C)
Specialty & Functional

Antimony Trioxide (ATO)

CAS 1309-64-4, Sb₂O₃

Antimony Trioxide (ATO) is the global benchmark synergist for halogenated flame retardant systems. Combined with brominated or chlorinated flame retardants, ATO multiplies fire-retardant efficiency in plastics, textiles, electronics housings, cables, and rubber. It is also the principal polycondensation catalyst for PET resin and a refining agent in specialty glass production.

Grades
Polymer Grade 99.7% (HG), Catalyst Grade 99.9% (PET), Rubber & Pigment Grade, Fine Particle (<1μm)
Specialty & Functional

Aziridine Crosslinker (Trifunctional)

CAS 64265-57-2, Trifunctional aziridine

Room-temperature reactive crosslinker for carboxyl-functional waterborne acrylic and polyurethane dispersions. Aziridine crosslinkers provide excellent chemical resistance, block resistance, and film hardness in water-based packaging inks and industrial coatings without requiring elevated cure temperatures, a clear advantage for flexible packaging and cold-cure applications.

Grades
PZ-28 (25% solution), CX-100
Specialty & Functional

BIT (Benzisothiazolinone)

CAS 2634-33-5, C₇H₅NOS

A mono-component isothiazolinone biocide offering excellent stability and compatibility with amine-containing formulations where CMIT/MIT is unsuitable. BIT is the preferred preservative for waterborne coatings, metalworking fluids, and personal care products in markets where CMIT is restricted. BPR PT2 and PT6 compliant.

Grades
10% Solution, 20% Solution, 98% Powder
Specialty & Functional

CMIT/MIT Biocide (5:1 Blend)

CAS 26172-55-4 / 2682-20-4, Isothiazolinone blend

The global standard in-can preservation system for waterborne paints, adhesives, and paper coatings. CMIT/MIT delivers broad-spectrum bactericidal and fungicidal efficacy at excellently low use concentrations. Formulated in full compliance with EU Biocidal Products Regulation (BPR), notified under PT2, PT6, and PT11. Documentation package includes SDS, efficacy data, and BPR notification reference.

Grades
1.5% Active (Standard), 14% Active (Concentrate)
Specialty & Functional

HALS (Hindered Amine Light Stabilisers)

CAS 52829-07-9 (monomeric HALS), Piperidine derivative

The most effective family of light stabilisers for outdoor-exposed polymers. HALS act as radical scavengers, interrupting the photooxidation chain reaction in PP, PE, PU, and coatings.

Grades
Monomeric HALS, Oligomeric HALS, Reactive HALS
Specialty & Functional

HDI Biuret / Trimer Crosslinker

CAS 4035-89-6 / 28182-81-2, Aliphatic polyisocyanate

Aliphatic polyisocyanate crosslinkers giving the highest exterior durability in 2-component polyurethane coatings. Unlike TDI/MDI aromatic isocyanates, HDI derivatives provide absolute non-yellowing and UV resistance, making them the mandatory hardener in automotive OEM and refinish clearcoats, aerospace topcoats, and premium exterior architectural coatings.

Grades
HDI Biuret ~23% NCO, HDI Trimer (Isocyanurate) ~21% NCO
Specialty & Functional

Silane Coupling Agents

Various, XₙSi(OR)₄₋ₙ

Bifunctional organosilicon molecules that create covalent molecular bridges between inorganic surfaces (glass, silica, metals) and organic polymer matrices. Silanes are widely used in fibreglass composite sizing, silica-reinforced green tyres, adhesion-promoting primers, and surface treatment of mineral fillers. The right silane chemistry multiplies the performance of composite systems, adhesives, and coatings.

Grades
GLYMO (Epoxy-Silane), APTES (Amino-Silane), VTEO (Vinyl-Silane), MPTMS (Mercapto-Silane), OTES (Alkyl-Silane)
Specialty & Functional

Zinc Stearate

CAS 557-05-1, Zn(C₁₈H₃₅O₂)₂

A metallic soap serving key functional roles as a release agent, lubricant, and heat stabiliser in polymer processing. In rubber, zinc stearate is the main activator co-agent with ZnO in sulphur vulcanisation systems. In PVC, it functions as an internal lubricant and component of calcium-zinc heat stabiliser packages, replacing toxic lead-based systems.

Grades
Rubber Grade, Plastic Lubricant Grade, Cosmetic Grade
Need a product not listed?
We source a wide range of industrial chemicals on request. Send us your specification and quantity.
Submit a Product Inquiry