How to qualify a second source for LABSA 96%

By Viora Chemicals, Groningen. Updated 15 October 2026.

Most detergent plants run on one LABSA supplier until something goes wrong: a plant outage, a late vessel, a price jump. A qualified second source protects your production and gives you a real price comparison. This guide covers what to check before you approve one.

1. Compare the specification line by line

Ask both suppliers for their guaranteed specification, not only a typical analysis. These are the figures that change how LABSA behaves in your plant:

ParameterTypical limitWhy it matters
Active matter96 wt% minSets how much LABSA you need per batch of finished product.
Free oil2.0 wt% maxUnsulfonated material. Too much gives haze, weaker foam and odour.
Free sulphuric acid1.5 wt% maxUses up caustic soda during neutralisation and adds sulphate to your product.
Water0.5 wt% maxHigher water can point to poor storage and makes the acid more corrosive.
Colour (5% AM), Klett40 maxImportant for clear liquids and white powders.

The values above are the typical limits on our LABSA 96% data sheet. If your current supplier works to tighter limits on one point, ask the new supplier whether they can match it in writing.

2. Test a sample in your own recipe

A CoA tells you the acid meets its specification. It does not tell you how it behaves in your formulation. Run three checks on a sample from a real production batch:

  1. Analysis: active matter by two-phase titration, free acid, water and colour. Compare with the supplier's CoA for the same batch.
  2. Neutralisation: neutralise to LAS in your normal process and record caustic consumption, temperature and the colour of the paste.
  3. Finished product: make a lab batch of your product. Check viscosity, clarity, foam and stability after a week at your normal storage temperature.

If the results match your current material, ask for a second sample from a different batch. Two good batches tell you much more than one.

3. Check transport and storage

LABSA is corrosive and is normally shipped as a class 8 dangerous good. Make sure the new supplier ships in packaging your site can receive: 200 L drums, IBC or bulk tanker. LABSA gets very thick in cold weather, so agree how winter deliveries are handled if you unload bulk. Check that your tanks and lines suit the material described in the supplier's SDS.

4. Ask for the documents up front

  • Technical data sheet and guaranteed specification
  • Safety data sheet in REACH format, in your language
  • Certificate of Analysis for the sample batch
  • Confirmation of REACH registration status for the supply route into the EU
  • Certificate of Origin, if your customers or customs need it

A supplier who sends all of this before you order is usually a supplier who will send it with every shipment. You can see what we provide on our Quality & Compliance page.

5. Start small, then split volumes

Most buyers start with a trial IBC or one truck, run it through production, and then move to a regular split such as 70/30 between the two sources. That keeps both suppliers sharp and your plant running if one of them has a problem.

Checklist

  • Guaranteed specification compared point by point
  • Sample analysed and tested in your own recipe
  • Second batch checked
  • Packaging, delivery and winter handling agreed
  • TDS, SDS, CoA and REACH status received
  • Trial delivery run through production

Want the data sheet or a sample?

Send product, quantity and destination. We reply within one business day with price, lead time and documents.